Welcome to BIOMED SIMULATION Knowledge Base
Installing Califia Simulator Software
Complete the following steps to install the Califia Simulator Program.
- Log on as an administrator or as a user with administrator privileges.
- For the best installation experience, it is strongly recommended that the computer’s antivirus program is disabled.
- Go to Settings > Apps > Remove Califia Simulator to uninstall existing software if
applicable. - Locate the installer zip file, and extract it to your Desktop.
![](https://kb.biomedsimulation.com/wp-content/uploads/2023/04/pic1-1.png)
- Open the extracted file, and double left click on the setup icon, and allow
![](https://kb.biomedsimulation.com/wp-content/uploads/2023/04/Picture4.png)
- Follow the instructions to installer instructions.
![](https://kb.biomedsimulation.com/wp-content/uploads/2023/04/pic1-2.png)
- Wait for the installer to finish updating your system, then hit Next.
![](https://kb.biomedsimulation.com/wp-content/uploads/2023/04/pic1-3-1024x395.png)
- Once that is done, the Califia Simulator icon should appear on your Desktop.
- In order to launch the software, right-click on the Califia Simulator icon and run as administrator and make sure to Allow access the first time it launches.
![](https://kb.biomedsimulation.com/wp-content/uploads/2023/04/pic1-4.png)
- Click the MENU button on the Opening Screen then Licensing to activate your software.
![](https://kb.biomedsimulation.com/wp-content/uploads/2023/04/pic1-5.png)
- Click on the Activate Online button, enter the License ID and Password provided by Biomed Simulation then click on Activate. Note: the computer must have internet access.
![](https://kb.biomedsimulation.com/wp-content/uploads/2023/04/pic1-6.png)
- Click the Show Modules to expand the view, enable any of the available modules then click Continue.
![](https://kb.biomedsimulation.com/wp-content/uploads/2023/04/pic1-7.png)
- Once it is successfully activated, exit the software completely, launch again, and have fun simulating.
![](https://kb.biomedsimulation.com/wp-content/uploads/2023/04/pic1-8.png)