Welcome to BIOMED SIMULATION Knowledge Base

Introduction to the Califia Perfusion Simulator

The Califia Perfusion Simulator system can simulate a patient before, during and after CardioPulmonary Bypass (CPB) for open heart surgery or long-term support with ExtraCorporeal Membrane Oxygenation (ECMO).

Components and Assembly of Califia Patient Module

The three components of the Califia Perfusion Simulator, are the Califia Patient Module (CPM), the Laptop Computer, and the Touchscreen Monitor. Apply power to each component.

The CPM connects to the Laptop Computer using an ethernet cable. Two cables connect the Touchscreen Monitor to the laptop, an HDMI cable, and a USB cable 

Califia Perfusion Simulator Setup

Table of Contents

Latest Articles

  • Document Preview
  • Sample Article 01
  • Califia Video
  • CPM connections for ECMO
  • CPM connections for Cardiopulmonary Bypass (CPB)